Section V. MAINTENANCE PROCEDURES

TM 11-6130-429-12

Section V. MAINTENANCE PROCEDURES

4-11.MAINTENANCE

INSTRUCTIONS

REMARKS

ACTION

ITEM

LOCATION

MAINTENANCE

INITIAL SET UP

Materials/Parts

Test Equipment

Bulb, incandescent

None

Brush, soft bristled, non metallic

Cleaning Compound

Special Tools

Paint

None

General Safety Instructions

Support Equipment

ON/OFF switch OFF

Tool Kit, Electronic

Equipment TK-101/G

CLEANING

WARNING

The following instructions

are provided to help meet

Cleaning compound is flammable and its serviceability requirements

fumes are toxic. Provide adequate ven- during organizational

tilation and do not use near flames or

maintenance and should

be done whenever needed.

extreme heat.

Remove loose dirt and dust from front

Case

Exterior

panel using soft clean cloth (item 4,

Appendix E) and/or soft bristled brush

(item 1, Appendix E).

Remove ground-in dirt or grease using

lint-free cloth (item 4, Appendix E)

dampened (not wet) with cleaning

compound (item 5, Appendix E).

Rinse cleaned areas with clean water

and allow to dry.

Blower

Remove dust and dirt from screen using

Screen

soft bristled, non metallic brush

(item 1, Appendix E).

4-11