Special Information - TM-11-6125-238-34P0004

1-4. Special Information

b. Federal Stock Number. Indicates the Federal

stock number assigned to the item and will be used

a. Usable on codes are included in column 3.

for requisitioning purposes.

Uncoded items are applicable to all models. Identifi-

c. Description. Indicates the Federal item name

cation of the usable on codes used in this publication

and a minimum description required to identify the

are-

item. The last line indicates the reference number

Code

Used on

fallowed by the applicable Federal Supply Code for

PP-1703/U

A7D

Manufacturer (FSCM) in parentheses. The FSCM is

used as an element in item identification to designate

b. The following publications pertain to the

manufacturer or distributor or Government agency,

PP-1703/U and its components:

etc., and is identified in SB 708-42.

TM 11-6125-238-12 Operator and Organizational

d. Unit of Measure (U/M). Indicates the standard

Maintenance Manual: In-

or basic quantity by which the listed item is used in

verter, Vibrator PP-1703/U.

performing the actual maintenance function. This

TM 11-6125-238-20P Organizational Maintenance

measure is expressed by a two-character alphabeti-

Repair Parts and Special

cal abbreviation; e.g., ea. in, pr, etc., and is the basis

Tools Lists: Inverter-Vibra-

used to indicate quantities and allowances in

tor PP-1703/U.

subsequent columns. When the unit of measure

TM 11-6125-238-35 Field and Depot Maintenance

differs from the unit of issue, the lowest unit of issue

Manual: Inverter, Vibrator

that will satisfy the required units of measure will be

PP-1703/U.

requisitioned.

e. Quantity Incorporated in Unit. This column

1-5. Location of Repair Parts

indicates the quantity of the item used in the

equipment Subsequent appearances of the same

a. This manual contains one cross-reference index

item in the same assembly are indicated by the

(see IV) to be used to locate a repair part when either

letters "REF".

the Federal stock number or reference number

(manufacturer's part number) is known. The first

f. 30-Day DS/GS Maintenance Allowances.

column in the index is prepared in numerical or

NOTE

Allowances in GS column are for GS

alphanumeric sequence in ascending order. The

maintenance only.

reference numbers (manufacturer's part numbers)

are listed immediately following the last listed

(1) The repair parts indicated by asterisk entries

Federal stock number in the index of Federal stock

in separate allowance columns for DS and GS

numbers.

represent those authorized for use at that category

b. When the Federal stock number or reference

of maintenance to be requisitioned on an "as

number is known, follow the procedures given in (1)

required" basis, until stockage is based on demand m

and (2) below.

accordance with AR 710-2

(1) Refer to the index of Federal stock numbers

(2) Allowance quantities are indicated in the

(sec IV) and locate the Federal stock number or

special tool lists section for special tools, TMDE, and

reference number. The FSN and reference number

other support equipment

g. 1 - y e a r Allowances P e r 1 0 0 E q u i p -

are cross-referencd to the applicable figure and

ments/Contingency Planning Purposes. Column in-

item number or reference designaion.

tentionally left blank.

(2) Refer to the repair parts list(sec II) and locate

h. Depot Maintenance Allowance Per 100 Equip-

the figure number (col 10a) and item number or

ments. This column indicates opposite the first

reference designation (col 10b as noted in the FSN

index.

appearance of each item the total quantity au-

c. When the figure and item number or reference

thorized for depot maintenance of 100 equipments.

designation are known, scrutinize columns 10a and

i. Illustration. This column is divided as follows:

10b of the repair pints list sec II) the item is

(1) Figure number. Indicates the figure number

located.

of thc illustration on which the item is shown in TM

d. When the FSN, reference number, figure

11-6125-238-35.

number. item number and reference designation are

(2) Item number. Indicates the item number or

not known, scrutinize column 3 of the repair parts list

reference designation used to reference the item in

the illustration.

(see II), which is arrange in alphabetical order.