COMPONENTS OF END ITEM AND
BASIC ISSUE ITEMS LIST
Section I. INTRODUCTION
This appendix lists components of end item and basic issue items for the converter to help you
inventory items required for safe and efficient operation.
The Components of End Item and Basic Issue Items Lists are divided into the following sections:
a. Section Il. Components of End Item. This listing is for informational purposes only, and is not
authority to requisition replacements. These items are part of the end item, but are removed and
separately packaged for transportation or shipment. As part of the end item, these items must be with
the end item whenever it is issued or transferred between property accounts. Illustrations are
furnished to assist you in identifying the items.
b. Section III. Basic Issue Items. These are the minimum essential items required to place the
converter in operation, to operate it, and to perform emergency repairs. Although shipped separately
packaged Bll must be with the converter during operation and whenever it is transferred between
property accounts. The illustrations will assist you with hard-to-identify items. This manual is your
authority to request/requisition replacement BII, based on TOE/ MTOE authorization of the end items.
C-3. EXPLANATION OF COLUMNS
The following provides an explanation of columns found in the tabular listings:
a. Column (1) - Illustration Number (IIlus Number). This column indicates the number of the
illustration in which the item is shown.
b. Column (2) - National Stock Number. Indicates the National stock number assigned to the
item and will be used for requisitioning purposes.
c. Column (3) - Description. Indicates the National item name and, if required, a minimum descrip-
tion to identify and locate the item. The last line for each item indicates the FSCM (in parentheses)
followed by the part number. If item needed differs for different models of this equipment, the model is
shown under the "Usable On" heading in this column. "Usable On" codes do not apply to this
d. Column (4) - Unit of Measure (U/M). Indicates the measure used in performing the actual
operational/maintenance function. This measure is expressed by a two-character alphabetical abbre-
viation (e.g., ea, in, pr).
e. Column (5) - Quantity required (Qty rqr). Indicates the quantity of the item authorized to be
used with/on the equipment.