Section I. INTRODUCTION - TM-11-6125-238-34P0002

SECTION I

INTRODUCTION

1-1. Scope

Code

Explanation

P D - Support item exluding support equipment,

This manual lists repair parts ands special tools

procured for initial issue or outfitting and

required for the fperjformance of direct support,

stocked only for subsequent or additional

gneeral support, and depot maintenance of the

initial issues or outfittings. Not subject to

PP-1703/U. The PCCN for the PP-1703/U is GTBASS

automatic replenishment.

for all models.

PE- Support equipment procured and stocked for

initial issue or outfitting to specified main-

tenance repair activities.

1-2. GENERAL

PF- Support equipmtn which will not abe stocked

but which will be centrally procured on

This repair parts and special tools list is divided into

demand.

the following sections:

PG- Item procured and stocke to provide for

a. Repair Parts List - Section II. A list of repair

parts authorized for the performance of mainte-

sustained support for the life of the

nance at the direct support, geneeral support, and

equipment. It is applied to an item

depot level. This repair parts list is arranged in

pecluliar to the equipment which because

alphabetical order.

of probable discontinuance or shutdown of

Special Tools, Test and Support

production facilities would prove un-

Equipment - Section III. Not applicable.

economical to reproduce at a later time.

c. Index - Federal Stock Number and Reference

K D - An item of depot overhaul/repair kit and not

Number Cross-Refference to Figure and Item

purchased separately. Depot kit defined

Number - Section IV. A list, in ascending numberical

as a kit that provides items required at the

sefquence, of all Federal stock numbers appearing in

time of overhaul or repair.

the listings, followed by a list, in alphameric

KF-

An item of a maintenance kit and not

sequence, of all reference numbers appearing in the

purchased separately. Maintenance kit

listings. Federal stock number and reference num-

defined as a kit that provides an item that

bers are cross-referenced to each illustration figure

can be replaced at organizational or direct

and item number or reference dsesignation appear-

support or general support levels of

ance.

maintenance.

KB-

I t e m included in both a depot over-

haul/repair kit and a maintenance kit.

1-3. Explanation of Columns

MO-

Item ot be manufactured or fabricated at

The following provides and explanation of columns

organizational level.

found in the tabular list.

MF-

Item to be manufactured or fabricated at

a. Source, Maintenance, and Recoverability Codes

direct support maintenance level.

(SMR).

MH-

Item to be manufactured or fabricated at

(1) Source code. Indicates the manner of acquir-

general support maintenannce level.

ing support items for maintenance, repair, or

MD-

Item to be manufactured or fabricated at

overhaul of end items. Source codes are-

depot maintenance level.

AO-

Item to be assembled at organizational level.

Explanation

Code

AF-

Item to be assembled at direct support

maintenance level.

PA-

Item procured and stocked ffor anticipated or

AH-

Item to be assembled at general support

known usage.

maintenance level.

PB-

Item procured and stocked for insurance

AD-

Item to be assembled at depot maintenance

purposes because essentiality dicttes

level.

that a minimum quantity be available in

XA-

Item is not procured or stocked because the

the supply systems.

requirements for the item will result in

PC-

Item procured and stocked and which

the replacement of the fnext highter as-

otherwise would be coded PA except that

sembly.

it is deteriorative in nature.